By looking at the title, you can understand how to create a portable version of Windows in this article. But the question is do you need to create a portable version of Windows?

If you are in the journalism or marketing related profession then you have to travel a lot or run a lot. The laptop or PC you work at home or in the office may not be taken with you on the trip. Sometimes you may need to use someone else’s PC or laptop at work, but you may not have the necessary apps or settings configured there. The portable version of Windows will get rid of these problems.

Once you have it installed on your pen drive, that pen drive will have your own set of windows, necessary apps, everything. Take it out of your pocket as needed and plug it into the USB port of your PC or laptop. পাবেন On a PC or laptop you will get a taste of your Windows with all the apps, settings of your personal PC. All you have to do is boot from that pen drive.

There are numerous ways to create a portable version of Windows. Here are the two simplest methods. One method will use Rufus and the other WinToUSB program.

Whatever it takes

• Rufus or WinToUSB software
• A high speed USB 3.0 pen drive of at least 32 GB. The higher the read-right speed and storage, the better. It is better not to worry about using USB 2.0.
• ISO file for the desired version of Windows operating system
• A valid license for Windows

How to create a portable version of Windows

Installing Windows on a USB drive with Rufus

This is the first Site Download Rufus from It does not need to be installed as it is a portable app.

Now connect your USB drive to the PC, open the app and select the drive on which you want to install Windows. Then click on the Select button to show the location of the previously downloaded Windows ISO file.

Now select “Windows to Go” from the image option.

Now go to “Partition Scheme” option, go to “MBR” and “Target System” option and select “BIOS” or “UEFI” according to your PC.

Then click on the Start button below and wait for the process to complete. When done, safely eject the pen drive. Now, if you want to run the portable Windows on the PC, insert the PC drive and reboot the PC and select USB as the boot drive from the BIOS, then your portable Windows will be booted on that PC.

How to create a portable version of Windows

Installing Windows on a USB drive with WinToUSB

This is the first Site Download WinToUSB from Download the free version for personal use. With this you will need the paid version to install the October, 2017 update of Windows. But you can install the April, 2018 version with the free version.

Once the app is installed and opened, you will get two options. One is to completely clone Windows on your PC with your settings and data and the other is to reinstall it as before. To clone, your USB drive must have the same or more storage as your PC’s C drive. Without going that way, it is shown that Windows has been installed anew.

Now click on the button next to the Select Image File box and select the downloaded Windows ISO file.

Now select the version of Windows that you have a license or want to use and press the Next button below.

Now select your desired USB drive.

Pressing Next can show a warning. Ignore it. Select “MBR for Bios and UEFI” from the next screen.

Now select legacy from installation mode by pressing yes button.

Clicking Next will start the process and wait until the installation is complete. Once the installation is complete, you can boot it on any PC as shown in the previous method.

Good to know

The process of creating portable windows is quite time consuming. If the file transfer speed of the pen drive is low, it may take a few hours to make Windows portable. Booting / starting for the first time will take quite some time to get Windows initial setup. Then start fairly quickly. So have a little patience. This process may change with the version and update of Windows 10.